The flat pressure indentation cutting machine has a simple structure and is convenient to operate, but if the maintenance is improper, it will still cause a malfunction. Therefore, the machine must be used, adjusted and maintained in strict accordance with the requirements to ensure the normal operation of the machine to improve the quality of the product and extend the service life of the machine.
         First, check the parts of the machine frequently, if there is no abnormality. If the machine is faulty or the parts are damaged, replace the parts in time.
         Second, the machine has an abnormal sound response to analyze the cause in time and give it to the exclusion.
          Third, when the machine is under pressure cutting, it is forbidden to drop any metal parts or hard objects into the cutting work plane, otherwise it will cause fatal damage to the machine.
         Fourth, when the machine is working, it should clean the scraps of paper scraps in time to prevent them from entering the sliding guide surface of the machine. When any sheet enters the rail surface, it may also cause fatal damage to the machine.
         Fifth, when loading and squeezing the cut surface and correcting the layout, it should be noted that the load of the press cut cannot be overloaded, and the balance of the one-sided and the plate spacing should be maintained. For the cutting line to be cut, the cutting edge should be sharp, otherwise it will seriously affect the normal movement of the machine.
         Sixth, pay attention to the lubrication of the machine before starting each time. After starting the machine, first check whether the safety protection device of the machine is flexible and reliable, and ensure the safe and reliable operation of the machine.

         Seventh, the electrical system of the machine should be well insulated to prevent moisture from entering the water.